1970 Charger R/T

What follows is a diary of the restoration of the Charger R/T complete with documentation pictures I will use when reassembly begins. Since I started the restoration prior to creating this part of the website, it make take some time to get caught up on the progress.

11/19/2014:

I started on the interior.

 

11/19/2014
Removed Console
Remove Shift Knob
Remove shift plate
Remove shift lamp from top plate
Remove 2 screws inside box
Remove 2 screws mid console to bracket
Remove Carpet
Remove seat belts 13/16 socket
Remove door seals
Remove kick panels
Remove door molding
11/23/2014
Remove rear wiring harness
Remove Gas cap
11/24/2014
Remove gas tank
Straps 9/16 deep socket
Fuel filler neck
cut rubber hoses
Removed Air Shock lines
12/7/2014
removed hood
removed radiator
removed radiator hoses
removed rear shocks
drained oil
removed oil filter
drained diff fluid
drained trans fluid
removed trans filter
removed fan, belt
removed thermostat housing
removed torque converted bolts
Removed electric fuel pump
Removed drive shaft
12/9/2014
Removed Negative Battery Cable
Removed Vacuum Canister
Removed Coil
Removed Voltage Regulator
Removed Horns
Removed Ignition Balast
Removed Hood Hinges
Removed Starter
Removed Power Steering Pump
Removed Alternator
Removed Intake Manifold with Carb attached
Removed Vacuum Hose from Intake Manifold
Removed Distributor Bracket
Removed Distributor
Removed Spark Plug Wires
Removed Engine Wiring Harnesses (3)
Removed Starter Relay
Removed heater hoses
12/10/2014
Windshiield Removed from Charger & RR
Steering Column Cover plate removed
Left and Right pillar molding removed
12/15/2014
Removed dimmer switch
Removed Steering harnesses
Removed Left Exhaust Maniford
Removed Brake Booster & Master Cylinder
Removed Steering Column
Removed Wiper Motor
1/1/2105
Removed Right Kick Panel
Removed Radio Bezel
Removed Ash Tray
1/2/2015
Dropping Dash
Unhooking Wiring & Vents
1/4/2015
Removed Dash
Removed Heater Box
Removed Door Switches
1/25/2015
Removed Right Exhaust Manifold
Removed Right Torsion Bar
1/27/2015
Removed Left Torsion Bar
1/30/2015
Worked on Removing Upper Control Arm
1/31/2015
Removed Both Upper Control Arms
Removed Transmission Crossmember
Detached Emergency Brake Cable
Dropped K-Member with Engine and Transmission Attached
Spluit Engine, Transmission and K-member
Mounted Engine on Engine Stand